|
| DIMENSIONS (HWD) 7 3/16” x 10 1/2” x 1 1/4” (18.2 cm x 26.6 cm x 3.1 cm) |
| WEIGHT: |
| 2.0 lbs (910 g) |
| Panel with one battery: 2.25 lbs (1.02 kg) |
| Panel with two batteries: 2.65 lbs (1.20 kg) |
| SCREEN PROPERTIES: |
| Screen resolution: 800 x 600 pixels (HV) @ 60 Hz frame frequency |
| Aspect ratio: 4 x 3 |
| Brightness (luminance): 180 cd/m2 |
| Channel transparency: 8-bit Alpha blending |
| Contrast ratio: 350:1 |
| Display colors: 256K colors (18-bit color depth) |
| Dot/pixel pitch: 0.21 mm |
| Panel type: TFT Color Active-Matrix |
| VIEWING ANGLE * Vertical: + 60° (up from center) and - 40° (down from center) |
| POWER REQUIREMENT (WITHOUT CHARGING): |
| Panel with batteries fully charged or with no batteries: |
| Constant current draw: 1.3 A @ 12 VDC |
| Startup current draw: 1.9 A @ 12 VDC |
| If panel is mounted onto a TDS or WDS, add 0.1 A to the above figures |
| POWER REQUIREMENT (WHILE CHARGING): |
| Panel while charging batteries: |
| Constant current draw: 3.3 A @ 12 VDC |
| Startup current draw: 3.9 A @ 12 VDC |
| If panel is mounted onto a TDS or WDS, add 0.1 A to the above figures |
| MINIMUM POWER SUPPLY REQUIRED: |
| PS4.4 Power Supply (FG423-44) |
| -All MVP models ship with this power supply |
| POWER MODES: |
| ON: Panel is fully functional. |
| STANDBY: Panel uses low power, the LCD/backlight is shutdown, LEDs still function. Panel resumes the ON mode in ~ 1 second. |
| OFF: On-board programs not running, touch screen still powered, LED not functional. Panel resumes the ON mode in ~ 30 seconds. |
| CERTIFICATIONS: |
| FCC Part 15 Class B and CE |
| IEC60950 |
| BATTERY DURATION (using 2 batteries): |
| Eight hours of normal use (25% On state, 25% Standby, and 50% Off) |
| Four hours of continuous use (continuous On state). The MVP-8400i panel is shipped with two MVP-BP batteries. You must use both batteries to obtain the duration times given above. |
| MEMORY * 128 MB SDRAM * 512 MB Compact Flash (upgradeable to 1 GB) – factory programmed |
| ENVIRONMENTAL: |
| Operating Temperature: 0° C (32° F) to 40° C (104° F) |
| Operating Humidity: 20% - 85% RH |
| Storage Temperature: -20° C (-4° F) to 60° C (140° F) |
| Storage Humidity: 5% - 85% RH |
| INCLUDED ACESSORIES: |
| PS4.4 Power Supply (FG423-44) |
| Stylus (pre-installed onto the left side of the unit) |
| Two MVP-BP Power Packs (FG5965-20) |
