|
| DIMENSIONS (HWD): 4 1/8” x 5 9/16” x 3 1/4” (10.5 cm x 14.2 cm x 8.2 cm) |
| WEIGHT 1.76 lbs (798 g) |
| POWER REQUIREMENTS: |
| Constant current draw: 650 mA @ 12 VDC |
| Startup current draw: 1.3 A @ 12 VDC |
| MEMORY * 128 MB SDRAM * 256 MB CompactFlash |
| PANEL LCD PARAMETERS: |
| Aspect Ratio: 16x9 |
| Brightness (luminance): 170 cd/m2 |
| Channel transparency: 8-bit Alpha blending |
| Contrast ratio: 250:1 |
| Display colors: 256K colors (18-bit color depth) |
| Dot/pixel pitch: 0.14 mm |
| Panel type: TFT Color Active-Matrix |
| Screen Resolution: 800 x 480 pixels (HV) @ 60 Hz frame frequency |
| Video format: NTSC, PAL, and SECAM |
| Viewing dimensions: 4.3” x 2.58” (109.2 mm x 65.2 mm) |
| VIEWING ANGLE: Up/Down/Left/Right: 85/85/85/85 |
| IR RECEPTION ANGLE: |
| Horizontal: + 25° (left and right from center) |
| Vertical: + 15° (up and down from center) |
| MOTION SENSOR (PIR) ACTIVATION: |
| Horizontal: + 25° (left and right from center) |
| Vertical: + 15° (up and down from center) |
| SUPPORTED AUDIO SAMPLE RATES: |
| 48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz, 12000Hz, 11025Hz, and 8000Hz |
| FRONT PANEL COMPONENTS: |
| Light Sensor: Photosensitive light detector for automatic adjustment of the panel brightness |
| Motion Sensor (PIR): Proximity Infrared Detector to wake the panel when panel is approached |
| IR Receiver: 38 kHz and 455 kHz AMX IR frequencies |
| Sleep Button: Pushbutton (gray) provides both access to the Setup and Calibration page and toggles the panel between a “sleep” or “wake” state |
| Microphone: Used for intercom applications (requires the NXA-AVB/ETHERNET Breakout Box for analog communication) |
| Speakers: Stereo output with a frequency response of 500 Hz - 7 kHz |
| Buttons: 6 programmable pushbuttons |
| SIDE PANEL CONNECTORS: |
| Power: 2-pin 3.5 mm mini-Phoenix connector |
| Ethernet 10/100 Port: Single RJ-45 port for 10/100 Mbps communication. LEDs show communication activity, connections, speeds, and mode information: L/A-link/activity - Green LED lights On when the Ethernet cables are connected and terminated correctly and then blinks when receiving Ethernet data packets. SPD-speed - Yellow LED lights On when the connection speed is 100 Mbps and turns Off when the speed is 10 Mbps. |
| Stereo Output Connector: Stereo output through a 3.5mm minijack (for use with external speakers or headphones) |
| Mini-USB Connector: 5-pin Mini-USB connector used for programming, firmware update, and touch panel file transfer between the PC and the target panel |
| USB Connector: Type A USB port connects an external keyboard or mouse device for use with Virtual PC applications |
| Audio/Video Connector: RJ-45 connection for A/V signals (via CAT5) between the NXA-AVB/ETHERNET Breakout Box and the panel |
| CERTIFICATIONS * FCC Part 15 Class B * CE * IEC 60950 |
| ENVIRONMENTAL: |
| Operating Temperature: 0° C (32° F) to 40° C (104° F) |
| Operating Humidity: 20% to 85% RH |
| Storage Temperature: -20° C (-4° F) to 60° C (140° F) |
| Storage Humidity: 5% to 85% RH |
| INCLUDED ACESSORIES: |
| Installation Kit (KA2261-01) |
| Trim Ring without button openings (60-2261-05) |
